Choosing the right bending machine for your machine shop or metal fabrication business requires understanding the differences between each and their unique features, uses and benefits. It is important...
The plate roll E79 2177-S has been tested in Italy. the machine performed the following pipe with positive result: Thickness 63 mm (2,5″) Pipe ID 711 mm (28″) Plate width: 2000 mm...
The new “baby” has finish its design stage, now will start the production phase. The E79-1400 has a bending power of 1400 Ton, pre-bending thickness of 3″, pipe ID of 32″, 7&pr...
the longer plates can be easily rolled thanks to the design of our machines. even on the back side of the machine there are no obstacles. Thanks to our design, which come from over 50 years of e...
We have installed a new Vertical Tank System in Usa. The plant is composed by different station. Decoiler station with tiltabe platform up to 45° Straightening rollers to remove the coi...
We have installed a new 20’ Pipes Production System in Asia. The plant is composed by: Automatic trolley that brings the sheet pack on the loading area Automatic loading system with v...
Tested our Vertical Tank System for large diameters for our American Customer. Main features of the system are Width of the plate: 2500 mm (98″) Plate thickness: 12 mm (1/2″) ...
Look what our plate bending machine E79 3175 can do: Plate thickness: 61 mm (2.4″) Plate width: 3050 mm (118″) Pipe ID: 792 mm (31″) Machine top roll diameter: 700 mm (27...
